Skip to content
thebigone.io/en/aide/facturation/factures-du-moisPublic · no sign-in needed

Check, invoice and send the month's invoices

Follow each client through four steps — check, invoice, send, paid — on a single screen, with a single button at a time.

For: Manager≈ 9 min readUpdated 14 October 2026
2 min 25 secSubtitles: 6 languages

All of a month's invoices are gathered on a single screen. Each client moves through four steps: “Check”, “Invoice”, “Send”, “Paid”. Use this article at the start of the month, to invoice the month just ended. Allow 2 to 3 minutes per client when there is no point to check.

An invoice that is already validated is corrected with a credit note: see Link your accounting software and issue a credit note. What the client sees on their side is described in The statement and prices in the client portal.

Read the month's screen

Step by step

  1. 1

    Open the Finance › Reports and invoices menu. The screen opens on last month, the one being invoiced.

  2. 2

    Change month with the two arrows next to the month.

  3. 3

    Click one of the figures at the top: “To check”, “Ready”, “Invoiced”, “Sent” or “Paid”. The list then shows only those invoices; a second click shows them all. The sixth figure is the “Month total”, incl. tax.

  4. 4

    Click a client. On a large screen, their preview is displayed beside the list, with the “Report”, “Invoice” and “History” tabs.

  5. 5

    Open “⋯” at the end of the line for the other actions. The button on the line is always the one for the current step.

In “⋯”What it does
Download the PDFSaves the cleaning report as a PDF
Client previewShows the PDF and the invoice in the client portal, as the client will see them
View the invoiceShows the invoice created by your accounting software
Back to checkingBefore invoicing: the invoice goes back to the “Check” step
CorrectAfter invoicing: creates a credit note or an additional invoice
Schedule sendingSets the date and time the invoice is sent to the client
HistorySays who changed which line, when and why

Set the missing prices and clients

Do this first: a property with no rate or no client to bill is not included in any report.

Step by step

  1. 1

    At the top of the screen, click Price and client to set up. The window of the same name opens and counts the properties concerned.

  2. 2

    In the “No rate” block, enter the “Price excl. tax” of each property.

    • The price marked “Suggested” comes from your price list. Nothing is saved until you have confirmed.
  3. 3

    In the “No client to bill” block, click “Choose the client” and choose the property's client.

  4. 4

    Click Save all. The window “Save … properties?” opens.

  5. 5

    Confirm with “Save all”. The properties are included in the reports. When none is left, the window shows “Everything is set up”.

Check an invoice

Step by step

  1. 1

    On the client's line, click Check. The invoice is displayed as the client will see it, line by line.

  2. 2

    Deal with the points to check, listed at the top under “… points to check before invoicing”. Each point has its button (table below).

  3. 3

    Click a line to change it. The “Where the price comes from” panel details the calculation.

  4. 4

    Under “Change this line”, fill in what changes, then write the “Reason (visible to the team only)”.

  5. 5

    Click Apply. The line is marked “changed” and the message “Line changed for the whole team” is displayed.

    • “Undo my changes” restores the calculated price.
    • “Remove from the invoice” takes the line off. It stays under “… lines removed from the invoice”, with the “Restore” button.
  6. 6

    If needed, write a note in “Message to the client”, then click “Save the message”. It is added to the email and at the bottom of the cleaning report, for that month.

  7. 7

    Click Mark as checked. The message “…: ready to invoice” is displayed and the invoice moves to “Ready”.

Point to checkButton
Cleaning not yet approved“Approve”, or “Approve all” for every cleaning in the list
Property without a price“› Set a price”
Duplicate job“See the line”
Job already invoiced“Remove from the invoice”
Client without a billing email“Complete the client details”
Credit note created in the accounting software without an invoice“Attach to this invoice”
In “Change this line”What it does
+ Extra timeAdds cleaning time to the line
+ Extra linen setAdds linen as a supplement
Discount (%)Lowers the line by a percentage
Free adjustment (±)Adds or removes an amount
Comment visible to the clientAdds a comment the client will be able to read
Bill toMoves the line to another client's invoice: it is marked “reassigned”

Issue the invoice

Step by step

  1. 1

    On the line of a ready invoice, click Invoice now. The window “Issue the invoice for …?” shows the amount incl. tax.

  2. 2

    Confirm with “Issue the invoice”. The message “…: invoice validated” is displayed: the invoice has its legal number in the accounting software and the cleaning report is attached to it.

  3. 3

    Several invoices ready, with no point to check? Click the “Invoice all (…)” button, then confirm with “Yes, invoice all (…)”.

Send to the client

Step by step

  1. 1

    On the line of a validated invoice, click Send to client. The window “Send the invoice for …” shows the client's address.

  2. 2

    To send straight away, click Send now. The message “…: invoice sent” is displayed. The invoice and the cleaning report go together, with your message to the client.

  3. 3

    To send later, choose the date and time under “Send later (Paris time)”, then click the “Schedule for …” button. The line shows “Sending planned for …”.

    • To cancel: open “⋯ › Scheduled sending…”, then click “Cancel scheduled sending”. This is possible as long as the email has not gone.

Invoice on custom dates

For a report that does not follow the month: a fortnight, a long stay, the end of a contract.

Step by step

  1. 1

    Click the month, at the top of the screen. The period picker opens.

  2. 2

    Choose “Custom dates”.

  3. 3

    Enter “From” and “To”, or click a shortcut: “This month”, “Last month”, “Last 30 days”, “This quarter”.

  4. 4

    Click Apply. The list, the figures and the panel switch to these dates, without changing page.

  5. 5

    Check each report, then click Save all, at the bottom of the list. Each report takes its number and joins the list of the month of its end date.

    • For a single client: “⋯ › Approve and save”.
    • At the bottom of the list, “CSV” and “All as PDF” export the reports for the period.
  6. 6

    Reopen the picker and choose “Month”. Invoice and send the report from the month's list.

Handle several clients at once

Step by step

  1. 1

    Tick the clients in the list, or click “Select all”. A bar is displayed at the bottom, with the number of clients selected.

  2. 2

    Click the action you want. Each action only handles the clients at the right step.

  3. 3

    Confirm in the window that opens. It names the lines left aside, and why.

Button in the barWhat it does
Check (…)Marks as checked the clients that have no point to check
Send to invoicing (…)Validates the ready invoices in the accounting software
Send (…)Sends the report and the invoice to each client straight away
Collect (…)Starts the SEPA Direct Debit: for each invoice, the balance due
Back to check (…)Takes the invoices not yet invoiced back to the “Check” step
Download the PDFs (…)Saves the reports as PDFs

Frequently asked questions

Can an invoice be changed after “Invoice now”?

No. A validated invoice keeps its legal number and can no longer be changed. Open “⋯ › Correct” to create a credit note or an additional invoice.

What happens if I change a line after marking the invoice as checked?

The client's line is marked “To revalidate”. Reopen the invoice and click “Mark as checked” again before invoicing it.

How do I collect from a client who has a SEPA mandate?

For that client, a “Collected” step is added between sending and payment. Click the client, open the “Invoice” tab, then click Collect and Confirm collection. Leave “Collection date” empty to collect as soon as possible.

How do I see what has changed compared with last month?

On the client's line, a percentage compares their total with last month. Click it: the window “…: compared with last month” lists the properties that change the most.

Where are the email templates, the SEPA mandates and the accounting software?

In the “Settings” button, at the top of the screen. It groups “Report appearance”, “Sending reports” (email templates and reminders), “My details” and “Invoicing” (accounting software). What the software does on its own is set in Finance › Rates and rules › Pricing rules. SEPA mandates and direct debits are in the Finance › Payments received menu. Clients are in the Finance › Clients menu; “Alerts” and “Archive” are above the list of reports.

How do I put my reports in my colour?

In “Settings”, then “Report appearance”: choose one of the suggested colours, type your colour code, or use the colour of your logo. The preview shows the report as your clients will receive it. The colour applies to every PDF from the software; the software keeps its own colours.

Was this article helpful?